The WiseCable® Heritage WC-HS Series is a budget-friendly cable railing kit for any type of wood post as an outside to outside fitting on a straight level run or on a pitch or stairs. The tensioning device is a 2-7/8” long threaded stud which installs on the back side of one end post. A pull lock fitting is installed through the other end.
This through-the-post configuration is the only scenario in which the economical threaded stud kits may be used. These threaded stud kits are more economical than the WiseCable® Estate WC-ES Series, but the threaded studs are a basic, functional fitting, not a hide-in-the-post solution. A brass hex nut and some metal thread will extend beyond the back of the post on one end. (Brass hex nut end cap sold separately.)
Use the WiseCable® Heritage WC-HS Series for decks with dedicated end posts for each run where the posts are situated such that, the back sides of the posts are all accessible. Meaning you can use a through-the-post configuration. This is both the most economical solution and where the fittings are least visible.
When taking the WiseCable® Heritage WC-HS Series cable railing through a corner, do not bend the cable past 45⁰ at any one time. If turning 90⁰, a 2-step turn using a double corner post configuration is required as illustrated in the corner post instructions
Tools needed for WiseCable® Heritage WC-HS Series on level straight runs:
5/32 drill bit
9/32 drill bit for threaded stud installation
29/64 drill bit for pull lock installation
7/32 wrench for holding the stud
7/16 wrench for tightening jam nuts
Cable cutting tool
If using post protector tubes, 1/4 drill bit
Please call us for the latest prices. We would be glad to confirm your order and to make payment arrangements. Orders can be shipped directly to your home or jobsite. Please phone or email if you have freight questions. Call for pricing and availability. 1-877-203-2004
If for any reason you need to cancel an order, please let us know as soon as possible.We charge a 20% restocking fee for orders that have already been processed. Unfortunately, special orders cannot be returned because they were milled to your specifications and thus cannot be resold.
Ipe Oil™ Hardwood Deck Finish, by DeckWise®, is an oil-based product that protects and conditions woods such as Ipe and Mahogany while also maintaining a natural appearance. It has been produced with professional results in mind, providing exceptional penetration, water repellency, and U.V. protection.
What are the benefits of using IPE OIL® HARDWOOD DECK FINISH?
Ipe Oil™ Hardwood Deck Finish is an oil-based natural wood finish specially designed for use on exterior hardwood decks. This product provides excellent penetration of even the densest hardwoods with the minimal raising of the grain. It protects and conditions the wood while maintaining a completely natural appearance. Ipe Oil™ Hardwood Deck Finish may be used on exterior hardwood to enhance the wood’s natural beauty with exceptional results on Ipe, Tigerwood, Cumaru and other exotic hardwoods.